[Feb 19, 2023] Lesson Brilliant PDF for the DES-6322 Tests Free Updated Today
Get New 2023 Valid Practice DCS-IE DES-6322 Q&A - Testing Engine
NEW QUESTION 31
An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?
- A. At least 24 in (61 cm) of clearance exists in front of and behind the cabinet
- B. Redundant power zones exist with adequate power cables
- C. Service laptop is on the same IP network as the iDRACs
- D. Power distribution supports only the power rating of a single node
Answer: B
NEW QUESTION 32
What is the maximum number of supported nodes in a VxRail Stretch Cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 33
What setting is used for the object space reservation in the VXRAIL-SYSTEM-STORAGE-PROFILE?
- A. 50% Reservation
- B. Thick Provisioning
- C. 75% Reservation
- D. Thin Provisioning
Answer: D
NEW QUESTION 34
A systems engineer is performing a VxRail upgrade in a VMware Horizon VDI cluster All hosts are put in Maintenance Mode.
What action does the engineer need to perform on each host once the upgrade has been completed?
- A. From the Connection Server, run IcMaintcmd to take the hosts out of Maintenance Mode and reboot them
- B. Set the InstantClone Maintenance annotation value to the original value
- C. From the Connection Server run IcMaintcmd to delete the parent VMs and exit Maintenance Mode for each host
- D. Set the InstantClone Maintenance annotation value to 2
Answer: C
NEW QUESTION 35
From what environment must a network administrator run VxRail network validation?
- A. Windows PowerShell command prompt
- B. Top of Rack switches
- C. VxRail Deployment Wizard
- D. Same subnet as VxRail Management Network
Answer: D
Explanation:
NEW QUESTION 36
The VxRail Deployment Wizard is being used on a VxRail cluster with a customer-supplied VDS. Which settings must be used to ensure successful installation?
- A. Join an external vCenter Server
Upload a configuration file (JSON) - B. Use the VxRail vCenter Server
Use the step-by-step method - C. Join an external vCenter Server
Use the step-by-step method - D. Use the VxRail vCenter Server
Upload a configuration file (JSON)
Answer: B
NEW QUESTION 37
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.
- A. Send your suggestions for this question.
Answer: A
NEW QUESTION 38
In addition to hardware monitoring, what is the purpose of the Dell PTAgent service on a VxRail node?
- A. Hardware discovery and firmware installation
- B. VxRail node discovery and software upgrades
- C. BOSS upgrade and firmware installation
- D. Hardware discovery and VxRail VIB installation
Answer: A
NEW QUESTION 39
An implementation engineer is working with a customer to prepare an external vCenter Server for a new VxRail deployment with the VxRail-deployed VDS. What vCenter objects must exist for a successful VxRail deployment?
- A. Datacenter and VxRail Management user only
- B. Datacenter and Cluster only
- C. Cluster and VxRail Management user only
- D. Datacenter Cluster, and VxRail Management user
Answer: A
NEW QUESTION 40
From what location should NVT for VxRail be run?
- A. Workstation on the same network as VxRail Manager
- B. VxRail network Top of Rack switch
- C. Laptop connected to the first VxRail ESXi node
- D. Jump server on a different network
Answer: C
NEW QUESTION 41
A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.
Which actions need to be performed?
- A. Verify VxRail nodes are racked and connected to the ToR switches
Validate the network environment - B. Verify the configuration settings initially captured in PEQ
Validate the storage environment - C. Validate that the latest updates and patches are installed in the system Validate that no pending and unfinished jobs are running on the servers
- D. Validate that no pending and unfinished jobs are running on the servers Verify that the server and storage components are working properly
Answer: C
NEW QUESTION 42
Which command is used to restart the Loudmouth process on an ESXi node?
- A. /etc/int.d/loudmouth restart
- B. systemcti restart vmware-loudmouth
- C. /usr/IibAmiware/loudmouth/bin/loudmouthd restart
- D. systemcti restart loudmouth
Answer: A
NEW QUESTION 43
Where can an administrator find steps to perform a manual verification of the customer network?
- A. Pre-Engagement Questionnaire (PEQ)
- B. Customer Simplified Form
- C. Dell Technologies SolVe Online
- D. Dell EMC VxRail Network Planning Guide
Answer: C
NEW QUESTION 44
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?
- A. Data-In-Transit Encryption: Addresses fear of media theft
Data-At-Rest Encryption: Addresses fear of rogue administrators - B. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only
- C. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server
- D. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster
Answer: B
NEW QUESTION 45
What is the maximum number of supported nodes for a VxRail cluster running on a 1 GbE network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 46
An implementation engineer is deploying a VxRail cluster with the VxRail Deployment Wizard Which user accounts must be defined for VxRail Manager?
- A. vCenter root account VxRail Manager service account
- B. VxRail Manager service account vCenter service account
- C. VxRail Manager root account vCenter service account
- D. VxRail Manager root account VxRail Manager service account
Answer: D
NEW QUESTION 47
How must node ports on Dell EMC ToR switches be configured when the Spanning Tree Protocol is enabled in an environment?
- A. As edge ports
- B. In Port-Channel mode
- C. As access ports
- D. In Forwarding status
Answer: A
NEW QUESTION 48
An implementation engineer is reviewing the customer requirements for a VxRail implementation The customer has specified noncontiguous hostnames and IP addresses What option should the engineer select in the VxRail Deployment Wizard to input the hostnames and IP addresses?
- A. Autofill - with the correct incrementor
- B. Custom
- C. Advanced
- D. Autofill - with the correct offset
Answer: D
NEW QUESTION 49
From what location should NVT for VxRail be run?
- A. VxRail network Top of Rack switch
- B. Laptop connected to the first VxRail ESXi node
- C. Workstation on the same network as VxRail Manager
- D. Jump server on a different network
Answer: C
NEW QUESTION 50
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.
Answer:
Explanation:
Send your suggestions for this question.
NEW QUESTION 51
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.
Answer:
Explanation:
Pending
Send your suggestions for this question.
NEW QUESTION 52
An implementation engineer is configuring the network firewall to support a VxRail installation. Where can they find the necessary firewall rules?
- A. Rack worksheet of the Network PEQ
- B. VxRail Configuration Portal
- C. Network Validation Tool
- D. As-Built Configuration Report
Answer: A
Explanation:
NEW QUESTION 53
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?
- A. Mystic
- B. Marvin
- C. Election
- D. Loudmouth
Answer: B
NEW QUESTION 54
Match each component of the VxRail HCI System Software to its description.
Answer:
Explanation:
NEW QUESTION 55
......
DES-6322 Dumps PDF - 100% Passing Guarantee: https://examcertify.passleader.top/EMC/DES-6322-exam-braindumps.html