Design Track Certification JN0-1103 Real Exam Questions and Answers FREE Updated on Jan 02, 2025
JN0-1103 Ultimate Study Guide - PassLeader
NEW QUESTION # 32
What is the forth step of the Juniper recommended executive summary structure of an RFP?
- A. Relevant supporting information outlining why the customer should choose your plan.
- B. Identification of business benefits.
- C. Overview of your proposed solution.
- D. Introduction of the customer's need or problem.
Answer: A
NEW QUESTION # 33
What are two benefits of the virtual chassis fabric (VCF) technology? (Choose two.)
- A. It supports up to 40 Gbps interfaces.
- B. One devices is broken up into multiple logical devices.
- C. It supports up to 10 Gbps interfaces.
- D. Multiple devices are inter-connected into a single logical device.
Answer: C,D
NEW QUESTION # 34
Which design boundary is caused by the customer's existing physical environment?
- A. Marketing users are not permitted access to the company's financial servers.
- B. HTTP traffic is expected to increase on the network by 57% over the next two years.
- C. Key stakeholders disagree on how the funding for the project should be spent.
- D. Current infrastructure lacks the media to interconnect buildings with each other.
Answer: D
NEW QUESTION # 35
Which two statements are true when determining the size and scope of a new network design?
(Choose two.)
- A. The type of devices is important.
- B. The type of devices is not important.
- C. The number of users is important.
- D. The number of users is not important.
Answer: A,C
NEW QUESTION # 36
What are three advantages of out-of-band (OoB) management over in-band management? (Choose three.)
- A. OoB frees up network bandwidth on campus switches.
- B. OoB is more cost-effective when purchasing equipment.
- C. OoB provides more reliable management access.
- D. OoB provides increased network security.
- E. OoB allows the use of Telnet as a management protocol.
Answer: A,C,D
NEW QUESTION # 37
You are designing a data center network that will require the rapid deployment and removal of security features between virtual machines based on triggered traffic flows.
The data center will require the ability to scale up and down rapidly according to traffic load, and then release resources when security services are not needed.
In this scenario, which type of security design would fulfill this requirement?
- A. a centralized security appliance
- B. an all-in-one virtual security device in each host
- C. a physical security device connected to each host
- D. a container-based security deployment
Answer: D
NEW QUESTION # 38
You are asked to provide a design proposal for a service provider network. The design must ensure that customers are able to send Layer 2 traffic between sites.
In this scenario, which VPN technology would be used to accomplish this task?
- A. IPsec VPN
- B. EVPN
- C. Layer 3 VPN
- D. GRE
Answer: B
NEW QUESTION # 39
Which popular data center architecture provides improved availability between two switching nodes?
- A. MPLS traffic engineering
- B. fabric Clos architecture
- C. multichassis link aggregation
- D. 802.1br
Answer: B
NEW QUESTION # 40
You have an access switch that must connect to an aggregation switch. The two switches are 2,600 feet (800 meters) apart.
Which type of media would be used to connect the Layer 2 switches?
- A. cat5 cable
- B. single-mode fiber
- C. multimode fiber
- D. cat6E cable
Answer: B
NEW QUESTION # 41
You are designing a solution to allow secure communication over the public Internet for a corporate WAN deployment. For business policy reasons, all branch-to-branch traffic must first pass through the corporate headquarters.
Which solution will work in this scenario?
- A. hub-and-spoke IPsec VPN
- B. hub-and-spoke GRE VPN
- C. fill mesh IPsec VPN
- D. Layer 3 VPN
Answer: A
NEW QUESTION # 42
Your customer has indicated that they are about to acquire another organization and integrate that acquisition into their corporation.
Which two major areas must be examined as part of the network design? (Choose two.)
- A. restructuring of staff responsibilities
- B. protocol incompatibilities
- C. scale constraints of existing hardware
- D. regulatory approval of the takeover
Answer: B,C
NEW QUESTION # 43
What are two aspects of greenfield projects? (Choose two.)
- A. Old equipment that should be replaced.
- B. New networks with few or no restraints to consider.
- C. Next-generation networks created from the ground up.
- D. Legacy applications that are no longer used.
Answer: B,C
NEW QUESTION # 44
What is a feature provided by devices in the WAN aggregation site of a large enterprise WAN deployment?
- A. Internet gateway
- B. power redundancy
- C. DHCP
- D. MACsec
Answer: A
NEW QUESTION # 45
What is the maximum length recommended for a single cat6E cable?
- A. 1000 feet (300 meters)
- B. 100 feet (30 meters)
- C. 328 feet (100 meters)
- D. 3280 feet (1000 meters)
Answer: C
NEW QUESTION # 46
You are working on a campus design for a customer who has acquired a building across the street from the main facility.
The recently acquired building was built in 1979 and has not been updated to support the demands of current network technologies. The building must support high-speed network connections for all users working at the location.
Which two elements would you consider when analyzing connectivity and throughput requirements for this new location? (Choose two.)
- A. the type of business the customer is in
- B. the hierarchical modules used within each group at the new location
- C. the condition of the physical media at the new location
- D. the data received from a traffic analysis
Answer: C,D
NEW QUESTION # 47
What are two main elements of a network design RFP? (Choose two.)
- A. environmental requirements
- B. business requirements
- C. e-waste requirements
- D. staffing requirements
Answer: A,B
NEW QUESTION # 48
In which two situations does physical device redundancy make sense in a network design? (Choose two.)
- A. When zero impact to users and applications is required during device failures.
- B. When downtime is not acceptable for device upgrades.
- C. When device failures in the customer's WAN provider are a possibility.
- D. When server load in the DMZ is a is higher than normal.
Answer: A,B
NEW QUESTION # 49
Connectivity issues have been seen by the users in remote offices when attempting to access resources at the corporate headquarters. You must design a fix for this issues.
Which technology should you include in your design?
- A. redundant WAN links
- B. accelerated WAN links
- C. hub-and-spoke VPN
- D. auto-discovery VPN
Answer: A
NEW QUESTION # 50
Which statements is true in regards to the Assess the Risks step of business continuity planning?
- A. You should perform a risk assessment.
- B. You should perform a business impact analysis.
- C. You should list all the functions and services in the network.
- D. You should develop a plan of action to mitigate the risks.
Answer: A
NEW QUESTION # 51
Why would you recommend Junos Space Security Director in a network design?
- A. It simplifies Ethernet switch deployments and provides rapid operation of campus and data center networks.
- B. It provides detection, isolation, and resolution of network faults and incidents.
- C. It helps administrators to more quickly and intuitively manage all phases of a security policy life cycle
- D. It provides the power to quickly design, provision, and deliver MPLS and other Ethernet services.
Answer: C
NEW QUESTION # 52
The connectivity and throughput requirements RFP element contains which two items? (Choose two.)
- A. Number of wireless connections needed
- B. Functionality of each module within the design
- C. Traffic analysis
- D. Hierarchical design considerations
Answer: A,C
NEW QUESTION # 53
......
Ultimate Guide to Prepare JN0-1103 Certification Exam for Design Track Certification: https://examcertify.passleader.top/Juniper/JN0-1103-exam-braindumps.html