300-410 Actual Questions Answers Pass With Real 300-410 Exam Dumps
300-410 Dumps Prepare Your Exam With 563 Questions
What Can You Benefit from Cisco 300-410 Exam
When you get a Cisco Certified Entry Network Technician (CCENT) you can make a difference in the world by helping to protect the environment and improve people's lives. Search for the opportunities to put your knowledge to work by placing Cisco 300-410 exam certification. Worth to get Cisco 300-410 certification to make a difference in the world. Certified professionals get better salary offers, more interesting jobs are available for them, and are able to move into other fields. Cover the Cisco 300-410 exam or get ready for the exam by using Cisco 300-410 exam dumps. Get ready to pass the 300-410 exam. Moment of success is now. Files are available for download. Understand the topics to pass the 300-410 exam.
NEW QUESTION # 291
Refer to the exhibit.
An administrator that is connected to the console does not see debug messages when remote users log in. Which action ensures that debug messages are displayed for remote logins?
- A. Enter the logging console debugging configuration command.
- B. Enter the terminal monitor exec command.
- C. Enter the aaa new-model configuration command.
- D. Enter the transport input ssh configuration command.
Answer: A
Explanation:
Explanation
The logging console is a default and hidden command.
NEW QUESTION # 292
Refer to the exhibit.
A company with autonomous system number AS65401 has obtained IP address block 209.165.200.224/27 fro, ARIN. The company needed more IP addresses and was assigned block 209.165.202.128/27 from ISP2. An engineer is ISP1 reports they are receiving ISP2 routes from AS65401. Which configuration onR1 resolves the issue?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/23675-27.html
NEW QUESTION # 293
Refer to the exhibit.
What does the imp-null tag represent in the MPLS VPN cloud?
- A. Pop the label
- B. Include the EXP bit
- C. Impose the label
- D. Exclude the EXP bit
Answer: A
Explanation:
Explanation
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet.
Note: pop means remove the top MPLS label
NEW QUESTION # 294
Refer to the exhibit.
Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and192.168.4.0/24 networks uses the HongKong router as the preferred router. Which set of configurations accomplishes this task?
- A. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/1
ip policy route-map PBR1 - B. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/1
ip policy route-map PBR1 - C. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/3
ip policy route-map PBR1 - D. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/3
ip policy route-map PBR1
Answer: D
Explanation:
We need to use Policy Based Routing (PBR) here on Bangkok router to match the traffic from 192.168.3.0/24 & 192.168.4.0/24 and "set ip next-hop" to HongKong router(172.18.1.2 in this case).
Note: Please notice that we have to apply the PBR on incoming interface e0/3 to receive traffic from 192.168.3.0/24 and 192.168.4.0/24.
NEW QUESTION # 295
Refer to the exhibit.
An engineer configured IP SLA on R1 to avoid the ISP link flapping problem. but it is not working as designed IP SLA should wait 30 seconds before switching traffic to a secondary connection and then revert to the primary link after waning 20 seconds, when the primary link is available and stabilized. Which configuration resolves the issue?
- A. R1(config)#ip sla 700
R1(config-ip-sla)#delay down 30 up 20 - B. R1(config)#ip sla 700
R1(config-ip-sla)#delay down 20 up 30 - C. R1(config)#track 700 ip sla 700
R1(config-track)#delay down 30 up 20 - D. R1(config)#track 700 ip sla 700
R1(config-track)#delay down 20 up 30
Answer: C
NEW QUESTION # 296
Configure individual VRFs for each customer according to the topology to achieve these goals :
R1
R2
SW1
SW2
SW3
Answer:
Explanation:
Solution:
Use cu-red under interfaces facing SW1 & SW3:
On R1:
interface Ethernet0/0
ip vrf forwarding cu-red
ip address 192.168.1.254 255.255.255.0
Check reachability to SW1:
R1#ping vrf cu-red 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R2:
interface Ethernet0/0
ip vrf forwarding cu-red
ip address 192.168.2.254 255.255.255.0
Check reachability to SW3:
R2#ping vrf cu-red 192.168.2.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Use vrf cu-green for SW2 & SW4:
On R1:
interface Ethernet0/1
ip vrf forwarding cu-green
ip address 192.168.20.254 255.255.255.0
Test reachability to SW2:
R1#ping vrf cu-green 192.168.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.22.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R2:
interface Ethernet0/1
ip vrf forwarding cu-green
ip address 192.168.22.254 255.255.255.0
Test reachability to SW4:
R2#ping vrf cu-green 192.168.22.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R1:
interface Ethernet0/2.100
mpls ip
!
interface Ethernet0/2.200
mpls ip
!
Configure BGP:
router bgp 65000
neighbor 10.10.10.2 remote-as 65000
neighbor 10.10.20.2 remote-as 65000
!
address-family vpnv4
neighbor 10.10.10.2 activate
neighbor 10.10.20.2 activate
exit-address-family
!
address-family ipv4 vrf cu-green
redistribute connected
exit-address-family
!
address-family ipv4 vrf cu-red
redistribute connected
exit-address-family
!
R1(config)#ip vrf cu-red
R1(config-vrf)#route-target both 65000:100
!
R1(config)#ip vrf cu-green
R1(config-vrf)#route-target both 65000:200
On R2:
interface Ethernet0/2.100
mpls ip
!
interface Ethernet0/2.200
mpls ip
!
router bgp 65000
neighbor 10.10.10.1 remote-as 65000
neighbor 10.10.20.1 remote-as 65000
!
address-family vpnv4
neighbor 10.10.10.1 activate
neighbor 10.10.20.1 activate
exit-address-family
!
address-family ipv4 vrf cu-green
redistribute connected
exit-address-family
!
address-family ipv4 vrf cu-red
redistribute connected
exit-address-family
R2(config)#ip vrf cu-red
R2(config-vrf)#route-target both 65000:100
!
R2(config)#ip vrf cu-green
R2(config-vrf)#route-target both 65000:200
Verification:
From SW1 to SW3:
SW1#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
But can't Reach SW2 or SW4 in VRF cu-green:
SW1#ping 192.168.22.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.22.1, timeout is 2 seconds:
U. U.U
Success rate is 0 percent (0/5)
SW1#ping 192.168.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.1, timeout is 2 seconds:
U. U.U
Success rate is 0 percent (0/5)
Same Test for SW2:
From SW2 to SW4:
SW2#ping 192.168.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
But can't Reach SW3 or SW1 in VRF cu-red:
SW2#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
U. U.U
Success rate is 0 percent (0/5)
SW2#ping 192.168.2.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds:
U. U.U
Success rate is 0 percent (0/5)
Both R1 & R2 has separate tables for VRFs cu-red and cu-green.
NEW QUESTION # 297
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
Reference:
https://www.rogerperkin.co.uk/featured/route-distinguisher-vs-route-target/
NEW QUESTION # 298
Refer to the exhibit.
A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands Which action resolves the issue?
- A. Configure the username from a local database
- B. Configure TACACS+ synchronization with the Active Directory admin group
- C. Configure an authorized IP address for this user to access this router
- D. Configure full access for the username from TACACS+ server
Answer: C
NEW QUESTION # 299
Refer to the exhibit.
An IPv6 network was newly deployed in the environment and the help desk reports that R3 cannot SSH to the R2s Loopback interface. Which action resolves the issue?
- A. Modify line 10 of the access list to permit instead of deny.
- B. Remove line 70 from the access list.
- C. Remove line 60 from the access list.
- D. Modify line 30 of the access list to permit instead of deny.
Answer: D
NEW QUESTION # 300
Refer to the exhibit.
The output of the trace from R5 shows a loop in the network.
Which configuration prevents this loop?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 301
Refer to the exhibit.
After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing. Which two actions resolve the issue? (Choose two.)
- A. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.
- B. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
- C. Change the mode from mode tunnel to mode transport on R3.
- D. Change the mode from mode transport to mode tunnel on R2.
- E. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
Answer: A,C
NEW QUESTION # 302
Refer to the exhibit.
An IP SLA was configured on router R1 that allows the default route to be modified in the event that Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which debug command is used to troubleshoot this issue?
- A. debug ip routing
- B. debug ip flow
- C. debug ip sla error
- D. debug ip packet
Answer: A
Explanation:
Explanation
debug ip routing This command enables debugging messages related to the routing table.
NEW QUESTION # 303
Refer to the exhibit.
An engineer is trying to configure local authentication on the console line, but the device is trying to authenticate using TACACS+. Which action produces the desired configuration?
- A. Add the login authentication Console command to the line configuration
- B. Replace the capital "C" with a lowercase "c" in the aaa authentication login Console local command.
- C. Add the aaa authentication login default group tacacs+ local-case command to the global configuration.
- D. Add the aaa authentication login default none command to the global configuration.
Answer: A
NEW QUESTION # 304
Refer to the exhibit.
An administrator configured a Cisco router for TACACS authentication, but the router is using the local enable password instead Which action resolves the issue?
- A. Configure the aaa authentication login default group admin local if-authenticated command instead.
- B. Configure the aaa authentication login admin group tacacs* local if-authenticated command instead.
- C. Configure the aaa authentication login admin group tacacs* local enable none command instead.
- D. Configure the aaa authentication login admin group admin local enable command instead.
Answer: B
NEW QUESTION # 305
Refer to the exhibit.
The neighbor relationship is not coming up Which two configurations bring the adjacency up? (Choose two)
- A. NY
interface E 0/0
no ip ospf message-digest-key 1 md5 Cisco123
ip ospf authentication-key Cisco123 - B. NY
router ospf 1
area 0 authentication message-digest - C. LA
router ospf 1
area 0 authentication message-digest - D. LA
interface E 0/0
ip ospf message-digest-key 1 md5 Cisco123 - E. LA
interface E 0/0
ip ospf authentication-key Cisco123
Answer: C,D
NEW QUESTION # 306
Refer to the exhibit. After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing. Which two actions resolve the issue? (Choose two.)
- A. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.
- B. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
- C. Change the mode from mode tunnel to mode transport on R3.
- D. Change the mode from mode transport to mode tunnel on R2.
- E. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
Answer: A,C
Explanation:
Section: VPN Technologies
NEW QUESTION # 307
Refer to the exhibit.
R1 has a route map configured, which results in a loss of partial IPv6 prefixes for the BGP neighbor, resulting in service degradation. How can the full service be restored?
- A. The route map requires a permit 20 statement without set conditions, and this will allow additional prefixes to be advertised.
- B. The route map requires a deny 20 statement without set conditions, and this will allow additional prefixes to be advertised.
- C. The neighbor requires a soft reconfiguration, and this will clear the policy without resetting the BGP TCP connection.
- D. The prefix lit requires all prefixes that R1 is advertising to be added to it, and this will allow additional prefixes to be advertised.
Answer: A
NEW QUESTION # 308
Drag and drop the packet types from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 309 
Refer to the exhibit. A network administrator configured mutual redistribution on R1 and R2 routers, which caused instability in the network. Which action resolves the issue?
- A. Set a tag in the route map when redistributing EIGRP into OSPF on R1. and match the same tag on R2 to deny when redistributing OSPF into EIGRP.
- B. Advertise summary routes of EIGRP to OSPF and deny specific EIGRP routes when redistributing into OSPF.
- C. Set a tag in the route map when redistributing EIGRP into OSPF on R1. and match the same tag on R2 to allow when redistributing OSPF into EIGRP.
- D. Apply a prefix list of EIGRP network routes in OSPF domain on R1 to propagate back into the EIGRP routing domain.
Answer: A
NEW QUESTION # 310
Refer to the exhibit.
A NOC team receives a ticket that data traffic from RA to RF is not forwarded when the link between the RC-RE path goes down. All routers learn loopback IP through the IGP protocol. Which configuration resolves?
- A. RD(config)# router bgp 65201
RDI(config-router)# neighbor 10.10.10.2 ebgp-multihop 3 - B. RB(config)# router bgp 65101
RB(config)#neighbor 10.10.10.3 update-source loopback 0 - C. RD(config)#router bgp B5201
RD(config-router)# neighbor 10.10.10.2 update-source loopback 0 - D. RD(config-router)# neighbor bgp 65101
RB(config-router)# neighbor 10.10.10.3 ebgp-multihop 3
Answer: D
NEW QUESTION # 311
The network administrator configured R1 to authenticate Telnet connections based on Cisco ISE using TACACS+. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing toward R1(192.168.1.1) with a shared secret password of Cisco123.
The administrator cannot authenticate to R1 based on ISE. Which configuration fixes the issue?
- A. tacacs-server host 192.168.1.5 key Cisco123
- B. line vty 0 4
login authentication telnet - C. line vty 0 4
login authentication TAC-SERV - D. ip tacacs-server host 192.168.1.5 key Cisco123
Answer: B
NEW QUESTION # 312
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION # 313
Refer to the exhibit.
An engineer sets up a DMVPN connection to connect branch 1 and branch 2 to HQ branch 1 and branch 2 cannot communicate with each other. Which change must be made to resolve this issue?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: C
Explanation:
R1(config)#int tunnel 1
R1(config-if) no ip split-horizon eigrp 100
NEW QUESTION # 314
Refer to the exhibit.
A network administrator sets up an OSPF routing protocol for a DMVPN network on the hub router. Which configuration required to establish a DMVPN tunnel with multiple spokes?
- A. ip ospf network point-to-point on the hub router
- B. ip ospf network point-to-point on both spoke routers
- C. ip ospf network point-to-multipoint on both spoke routers
- D. ip ospf network point-to-multipoint on One spoke router
Answer: C
NEW QUESTION # 315
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
Explanation
HTTP and HTTPs run on TCP port 80 and 443, respectively and we have to remember them.
Syslog runs on UDP port 514 while NTP runs on UDP port 123 so if we remember them we can find out the matching answers easily. But maybe there is some typos in this question as 2001:d88:800:200c::c/126 only ranges from 2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f (4 hosts in total). It does not cover host
2001:0D88:0800:200c::1f. Same for 2001:D88:800:200c::e/126, which also ranges from
2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f and does not cover host 2001:0D88:0800:200c::1c.
NEW QUESTION # 316
......
New 300-410 Dumps - Real Cisco Exam Questions: https://examcertify.passleader.top/Cisco/300-410-exam-braindumps.html